Fero Thermal Ties And Connectors

A structural thermal break to offset shelf angles from the backup wall.

The FERO FAST THERMAL BRACKET Advantage

Energy Efficiency

Thermal bridging caused by conventionally installed steel shelf angles profoundly affects the energy efficiency of your wall system, limiting the effectiveness of insulation by over 50%. Standing off the shelf angle allows for continuous insulation behind the shelf angle, reducing thermal bridging by only 14%.

Download Brochure >

Download Thermal Analysis Report

Easy Installation

FAST Thermal Brackets are readily available in any size height or depth to accommodate any shelf angle, anchoring system, and backup wall type.

Installation is quick and simple—anchor the FAST Thermal Bracket into the backup wall and slip the angle in. In most cases, only one trade is needed onsite for the complete installation.

View Installation Guide

Onsite Adjustability

FAST Thermal Brackets offer significantly greater onsite adjustability than conventional angles. Slots on the bracket offer 1- ¾″ of vertical adjustability, and the FAST Thermal Bracket can be rotated to ensure the shelf angle is level. Horizontal adjustment is provided by FERO Shim Plates placed behind the bracket.

Reduce Costs

The depth of the FAST Thermal Bracket can be increased to accommodate any wall cavity size while continuing to use a standard 4×4×1/4” shelf angle. This eliminates the need to use larger, much more expensive shelf angles in walls with thicker insulation and larger cavity sizes.

The adjustability and ease of installation by a single trade also reduce cost by speeding up installation time and reducing labor costs.

FERO’s experienced technical staff is available to assist in designing a FAST Bracket solution to minimize project materials costs

FAST THERMAL BRACKET CONFIGURATIONS:

GET ADDITIONAL INFORMATION

TECHNICAL REPORTS

Please select a file

DESIGN DETAILS

Please select a file

How to Order

Ready to get started? Find out next steps to take to place an order with FERO.

Expert Support

Talk to a FERO expert for help designing the right solution for your building project.

PHONE: 780.455.5098

EMAIL: ENGINEERING@FEROCORP.COM